1.Accidental release measures

Person-related safety precautions
Ensure adequate ventilation. Avoid dust formation. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering. Keep unnecessary personnel away. Avoid breathing dust.
Measures for environmental protection
Prevent further leakage or spillage if safe to do so. Do not allow material to be released to the environment without proper governmental permits.
Measures for cleaning/collecting
Pick up and arrange disposal in suitable container.
Clean contaminated surface thoroughly.

2.Handling and storage

Handling
Information for safe
handling
Avoid contact with skin, eyes, mucous membranes and clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid formation of dust and aerosols.
Information about protection against explosions and fires
Keep away from heat, sources of ignition, sparks or open flame.
STORAGE
Requirements to be met by storerooms and containers
Keep in a cool, dry, well-ventilated place.
Keep away from fire and heat source.
Avoid direct sunlight.
Keep tightly closed until used.
Avoid moisture.
Plastic bags or two-layer kraft paper bags with full or middle opening steel drums: screw-top glass bottles, iron-capped glass bottles, plastic bottles or metal drums (cans) and ordinary wooden boxes: (metal containers are not allowed for inner packaging). Store separately from sodium, potassium, and edible chemicals, avoid mixed storage.

Information about storage in one common storage facility
Store away from incompatible substances such as strong oxidizing agents, metals, moist air.
Further information about storage conditions
The storage area should be equipped with suitable materials to contain the leakage.

3. Exposure controls/personal protection

Limit Values for Exposure
Component CAS number TLV ACGIH -TWA ACGIH TLV-STEL NIOSH PEL-TWA NIOSH PEL-STEL
Cupric chloride anhydrous 7447-39-4 1 mg/m3 N.E. 1 mg/m3 N.E.
Appropriate engineering controls
Use adequate ventilation to keep airborne concentrations low.
Facilities storing or utilizing this material should be equipped
with an eyewash and a safety shower facility.
General protective and hygienic measures
Do not get this material in contact with skin. Do not get thi
Personal protective equipment
Chemical safety glasses, gloves, overalls and protective masks.
Breathing equipment
When workers are facing high concentrations they must use appropriate certified respirators.
Protection of hands
Wear appropriate chemical resistant gloves.
Eye/Face protection
Use safety glasses with side shields or safety goggles as mechanical barrier for prolonged exposure.
Body protection
Full set of anti chemical reagent overalls, choose body protection according to the amount and concentration of the dangerous substance at the work place.